Ho una linux box con 3 interfacce di rete la prima eth0 e collegata ad un router quind intet address 192.168.0.2 default gw 192.168.0.1
la seconda e' eth1 ed e' la mia interfaccia lan wired inet 192.168.1.1
la terza e la wlan0 alla quale ho assegnto un ip statico intet static 192.168.2.1 ... qual'e' il suo gateway ? ha un gateway ?Io di wireless ci capisco una ... quindi vi posto i vari ifconfig e iwconfig:root@argo:~# ifconfig<br />eth0 Link encap:Ethernet HWaddr 00:C0:49:D5:F9:2E<br /> inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0<br /> inet6 addr: fe80::2c0:49ff:fed5:f92e/64 Scope:Link<br /> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br /> RX packets:134265 errors:0 dropped:0 overruns:0 frame:0<br /> TX packets:140676 errors:0 dropped:0 overruns:0 carrier:0<br /> collisions:0 txqueuelen:1000<br /> RX bytes:91333293 (87.1 MiB) TX bytes:89200317 (85.0 MiB)<br /> Interrupt:10 Base address:0x2400<br /><br />eth1 Link encap:Ethernet HWaddr 00:50:FC:58:97:2C<br /> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0<br /> inet6 addr: fe80::250:fcff:fe58:972c/64 Scope:Link<br /> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br /> RX packets:23228 errors:0 dropped:0 overruns:0 frame:0<br /> TX packets:19413 errors:0 dropped:0 overruns:0 carrier:0<br /> collisions:0 txqueuelen:1000<br /> RX bytes:2687244 (2.5 MiB) TX bytes:7065532 (6.7 MiB)<br /> Interrupt:9 Base address:0x2800<br /><br />lo Link encap:Local Loopback<br /> inet addr:127.0.0.1 Mask:255.0.0.0<br /> inet6 addr: ::1/128 Scope:Host<br /> UP LOOPBACK RUNNING MTU:16436 Metric:1<br /> RX packets:0 errors:0 dropped:0 overruns:0 frame:0<br /> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0<br /> collisions:0 txqueuelen:0<br /> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)<br /><br />wlan0 Link encap:Ethernet HWaddr 00:15:E9:10:EC:04<br /> inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0<br /> UP BROADCAST MULTICAST MTU:1500 Metric:1<br /> RX packets:0 errors:0 dropped:0 overruns:0 frame:0<br /> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0<br /> collisions:0 txqueuelen:1000<br /> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)<br /> Interrupt:11 Base address:0x2000<br /><br />root@argo:~# iwconfig<br />lo no wireless extensions.<br /><br />eth0 no wireless extensions.<br /><br />eth1 no wireless extensions.<br /><br />wlan0 IEEE 802.11b+ ESSID:"STA10EC04" Nickname:"acx v0.3.36"<br /> Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated<br /> Bit Rate:22 Mb/s Tx-Power=18 dBm Sensitivity=176/255<br /> Retry min limit:7 RTS thr:off<br /> Encryption key:off<br /> Power Management:off<br /> Link Quality=49/100 Signal level=54/100 Noise level=9/100<br /> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br /> Tx excessive retries:0 Invalid misc:0 Missed beacon:0<br /><br />sit0 no wireless extensions.
quell'access point not associated mi preoccupa che vuol dire ????
Vi prego aiutatemi grazie !!!! :idea:
Gateway con interfacce di rete miste
Questi i comandi che ho fatto per ora ma ancora non riesco ad associare la scheda all'access point rilevato:root@argo:~# iwlist wlan0 scan<br />wlan0 Scan completed :<br /> Cell 01 - Address: 00:19:3E:77:E1:47<br /> ESSID:"Alice-59861934"<br /> Mode:Master<br /> Frequency:2.412 GHz (Channel 1)<br /> Quality=8/100 Signal level=53/100 Noise level=29/100<br /> Encryption key:on<br /> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s<br /> 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s<br /> 48 Mb/s; 54 Mb/s
poi lancio i l seguente comando e vedo se l'access point e' stato assegnatoroot@argo:~# iwconfig wlan0 mode managed channel 1 essid Alice-59861934 ap 00:19:3E:77:E1:47<br />root@argo:~# iwconfig<br />lo no wireless extensions.<br /><br />eth0 no wireless extensions.<br /><br />eth1 no wireless extensions.<br /><br />wlan0 IEEE 802.11b+ ESSID:"Alice-59861934" Nickname:"acx v0.3.36"<br /> Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated<br /> Bit Rate:1 Mb/s Tx-Power=18 dBm Sensitivity=176/255<br /> Retry min limit:7 RTS thr:off<br /> Encryption key:8B2A-0000-00 Security mode:open<br /> Power Management:off<br /> Link Quality=0/100 Signal level=46/100 Noise level=32/100<br /> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br /> Tx excessive retries:878 Invalid misc:0 Missed beacon:0<br /><br />sit0 no wireless extensions.
Ancora:Access Point: Not-Associated
Cos'altro devo fare ?????
Non hai specificato il sistema di sicurezza con cui la rete è protetta. Quando sai quello documentati sul driver della tua scheda wireless su come attivarlo. Poi devi vedere la tua rete, ribadisco il concetto di sopra, hai 3 lan logicamente separate, con che scopo?
ciao
mah, detto così non ha gran senso quello che scrivi.
Cosa ci devi fare con quelle 3 reti di classe C almeno dal punto di vista logico separate?