Ciao a Tutti
HO dei problemi con questo chip audio integrato su una vecchia motherboard.
Potreste aiutarmi? il PC è muto!
Debian Stable 64bit GNOME
Audio non funziona su Chip intel ich5
Lun, 06/10/2014 - 19:08
Mar, 07/10/2014 - 18:54
#2
$ LANG=C aplay --list-devices **** List of PLAYBACK Hardware Devices **** card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel ICH5 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0
~$ lspci -v -n 00:00.0 0600: 8086:2570 (rev 02) Subsystem: 1043:80f2 Flags: bus master, fast devsel, latency 0 Memory at dc000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 0604: 8086:2571 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: e0000000-faffffff 00:06.0 0880: 8086:2576 (rev 02) Flags: fast devsel Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00:1d.0 0c03: 8086:24d2 (rev 02) (prog-if 00 [UHCI]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at b800 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 0c03: 8086:24d4 (rev 02) (prog-if 00 [UHCI]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at c000 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 0c03: 8086:24d7 (rev 02) (prog-if 00 [UHCI]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at c400 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 0c03: 8086:24de (rev 02) (prog-if 00 [UHCI]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at c800 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20 [EHCI]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbdffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 0604: 8086:244e (rev c2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff 00:1f.0 0601: 8086:24d0 (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: 1043:80a6 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at fc00 [size=16] Memory at c0000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: 1043:80a6 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18 I/O ports at a800 [size=8] I/O ports at a400 [size=4] I/O ports at a000 [size=8] I/O ports at 9800 [size=4] I/O ports at 9400 [size=16] Kernel driver in use: ata_piix 00:1f.3 0c05: 8086:24d3 (rev 02) Subsystem: 1043:80a6 Flags: medium devsel, IRQ 17 I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 00:1f.5 0401: 8086:24d5 (rev 02) Subsystem: 1043:810d Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at b400 [size=256] I/O ports at b000 [size=64] Memory at fbdff800 (32-bit, non-prefetchable) [size=512] Memory at fbdff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: snd_intel8x0 01:00.0 0300: 1002:9495 (prog-if 00 [VGA controller]) Subsystem: 1043:0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at d000 [size=256] Memory at fbee0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 0403: 1002:aa38 Subsystem: 1043:aa38 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fbefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:05.0 0200: 8086:100e (rev 02) Subsystem: 1043:80ee Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22 Memory at fbfe0000 (32-bit, non-prefetchable) [size=128K] I/O ports at e800 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 02:0c.0 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI]) Subsystem: 1186:0035 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at fbfd9000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 02:0c.1 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI]) Subsystem: 1186:0035 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at fbfda000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 02:0c.2 0c03: 1033:00e0 (rev 04) (prog-if 20 [EHCI]) Subsystem: 1186:f101 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at fbfdbc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd htpcdario@htpcdebian:~$
:~$ lsmod Module Size Used by bnep 17567 2 rfcomm 33700 0 bluetooth 119455 10 rfcomm,bnep rfkill 19012 3 bluetooth binfmt_misc 12957 1 nfsd 216167 2 nfs 308353 0 nfs_acl 12511 2 nfs,nfsd auth_rpcgss 37143 2 nfs,nfsd fscache 36739 1 nfs lockd 67306 2 nfs,nfsd sunrpc 173730 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 22641 0 snd_hda_codec_hdmi 30824 1 hid_logitech 17472 0 joydev 17266 0 ff_memless 12708 1 hid_logitech snd_hda_intel 26259 1 snd_hda_codec 78031 2 snd_hda_intel,snd_hda_codec_hdmi snd_intel8x0 30903 2 snd_ac97_codec 106942 1 snd_intel8x0 snd_hwdep 13186 1 snd_hda_codec radeon 722295 2 snd_pcm 68083 5 snd_ac97_codec,snd_intel8x0,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi ttm 53664 1 radeon drm_kms_helper 31370 1 radeon snd_page_alloc 13003 3 snd_pcm,snd_intel8x0,snd_hda_intel snd_seq 45126 0 snd_seq_device 13176 1 snd_seq drm 183952 4 drm_kms_helper,ttm,radeon power_supply 13475 1 radeon serio_raw 12931 0 pcspkr 12579 0 evdev 17562 15 iTCO_wdt 17081 0 iTCO_vendor_support 12704 1 iTCO_wdt snd_timer 22917 2 snd_seq,snd_pcm snd 52893 16 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_ac97_codec,snd_intel8x0,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi i2c_algo_bit 12841 1 radeon rng_core 12652 0 i2c_i801 16870 0 soundcore 13065 1 snd ac97_bus 12510 1 snd_ac97_codec i2c_core 23876 5 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,radeon parport_pc 22364 0 parport 31858 1 parport_pc processor 28149 0 button 12937 0 thermal_sys 18040 1 processor shpchp 31293 0 ext4 350763 3 crc16 12343 2 ext4,bluetooth jbd2 62115 1 ext4 mbcache 13114 1 ext4 usb_storage 43870 0 usbhid 36418 1 hid_logitech hid 81372 2 usbhid,hid_logitech ohci_hcd 26563 0 sd_mod 36136 5 crc_t10dif 12348 1 sd_mod sg 25874 0 sr_mod 21899 0 cdrom 35401 1 sr_mod ata_generic 12479 0 floppy 53134 0 ata_piix 29535 4 libata 140630 2 ata_piix,ata_generic uhci_hcd 26865 0 ehci_hcd 40249 0 e1000 86156 0 usbcore 128741 6 ehci_hcd,uhci_hcd,ohci_hcd,usbhid,usb_storage scsi_mod 162269 5 libata,sr_mod,sg,sd_mod,usb_storage usb_common 12354 1 usbcore
L'ho tolto dalla zona giorno e collegato alla postazione "fotografica"... sono anni che l'audio su questo pc con linux fa le bizze! mi piacerebbe risolvere e capire la causa, così da poter agire in autonomia nel caso si ripresentasse il problema
Alsamixer è tutto on, ma tutte le vole prende come periferica di default pulse e no ich5.... 
Dico magari una bestialità, non potrebbe essere che manca un modulo del kernel?
Gio, 09/10/2014 - 18:22
#3
UP
Dom, 12/10/2014 - 11:40
#4
Quello che hai postato sembra in ordine. Ricorda solo che hai 2 schede audio: una è quella che citi, l'altra è quella annegata nella scheda video, che manda il suono ad una eventuale televisione tramite cavo HDMI. Controlla di non aver da nessuna parte quest'ultima configurata come periferica di uscita.
Infine, scusa se insisto, ma potresti controllare una seconda volta alsamixer? Non hai idea di quanti problemi con l'audio segnalati nei forum Linux in tutto in mondo si chiudono dopo aver premuto M in un paio di punti in alsamixer! 
Mar, 14/10/2014 - 10:41
#5
Grazie della risposta, ricontrollerò per l'ennesima volta alsamixer.
Il dubbio che ho, a questo punto è che manchi qualche firmware o modulo.
Inoltre ho notato che alsamixer quando lo apro, prende coma sound card, pulse audio, io lo cambio con f6, ma uscendo e riaprendolo torna sempre pulse audio.
ho provato col comando alsastore (se non erro) ma niente cambia.
C'è un modo per impostare determinati paramentri di alsa di default?
Grazie
Mer, 10/12/2014 - 12:07
#6
Help please!
Gio, 11/12/2014 - 17:30
#7
Lascia per il momento perdere alsamixer, se vai in "Impostazioni di Sistema" "Audio" "Tab: Hardware" e fai il test degli altoparlanti, ti funzionano?
Sab, 20/12/2014 - 10:34
#8
Nu 
ho provato e non funzionano.
Sab, 20/12/2014 - 16:39
#9
Hai provato cambiando il "Profilo" tra un test e l'altro? L'utente appartiene al gruppo "audio", puoi controllare con il comando:
~$ groupsPuoi postare l'output del comando:
~$ pacmd list-sinks
Se ti dice comando non trovato installa il pacchetto
pulseaudio-utils.
Qualche dettaglio in più non guasterebbe, sia sull'hardware (
lspci -v -n), sia sul software (lsmod,dmesg), sia sulle prove che hai già fatto (alsamixer? PulseAudio?)Sicuro non sia solo un problema di volume (in senso lato, non solo se è a 0 o al 100%, ma quale canale è impostato come master, eventuali flag "mute", ecc.)?